H106-2 AKCP Airflow Sensor

(Chưa VAT)

Thông tin sản phẩm

The Airflow Sensor is designed for systems that generate heat in the course of their operation and a steady flow of air is necessary to dissipate this heat generated.

This device is meant to measure the presence or the absence of airflow.

  • Product Code: AFS00
  • Powered by the base unit
Số lượng

The Airflow sensor is placed in the path of the air stream, where the user can monitor the status of the flowing air. The airflow sensor is not a precision measuring instrument. This device is meant to measure the presence or the absence of air flow.

In addition to the sensors ON or OFF status, the airflow sensors condition can also be read via an SNMP get using its OID. SNMP traps sent when critical. SNMP polling via get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.

This is not a precision sensor, it is ONLY designed to sense the presence and non-presence of airflow and not to measure the amount of airfow. It is best used to send an alert in the case of a fan, AC failure or when airflow is present when it should not be.

Features:

  • On/off alarm signal of airflow
  • Accurate, cost effective flow sensing
  • Operates from a single +5 V DC Power Supply which powered by the sensorProbe
  • 2 LEDs indicate the status of Airflow and that the sensor is securely plugged into the sensorProbe
  • Electronics mounted in a small plastic case
  • sensorProbe auto detects the presence of the airflow sensor
  • Up to 2 airflow sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
  • Full autosense including disconnect alarm
  • Data graphically displayed via a web page
  • AFS00 can be extended to your desired cable length using one of our CAT5 extension cables, CABXX, or you can provide your own cable of any length up to 60 feet

Specifications

Measurement Range Normal or Critical
Sensor Type Thermistor / On or Off
Measurement Rate Multiple readings every second
Indication LED for Status
LED for connectivity
Operating Temperature -20 °C~60 °C
4 °F~140 °F
   
Interface  
Communications Cable RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length The AirFlow Sensor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 60 feet, or 18 meters using standard CAT5/6 LAN cable
Power Source Powered by the controller unit. No additional power needed
  Full autosense including disconnect alarm
Power Consumption Typical 430 mWatt, 85mA
Dimensions 56 x 55 x 33.3 mm
Mounting DIN rail mounting
Screw mounting
Sensor count 1

Download Datasheet

 

Đang cập nhật...
Link DownLoad: DataSheet
Nội dung hỗ trợ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Trang chủ Danh mục 0 Giỏ hàng Đại lý Tài khoản