H108-2 AKCP 5 Dry Contact Inputs (SP2 / SP2+ Only)

(Chưa VAT)

Thông tin sản phẩm

Add 5 dry contacts per RJ45 port on the SP2 and SP2+
These dry contact ports can be used to monitor any dry contact inputs through an RJ45 sensor port. Have up to 10 dry contacts on an SP2 and 20 on an SP2+. The sensor requires the 10 dry contact unlock license for the SP2. On the SP2+ 5 dry contact licenses are sold on a per-port basis. The dry contacts on the 5DCS are input only, if you require I/O on a sensor port, use the single dry contact cable (DCS15).

  • Product Code: 5DCS
  • Powered by the base unit
 
Số lượng
Measurement Range Alarm or Normal
Sensor Type Open / Closed contact switch (input only)
Contact voltage range 5 volts pulled-up dry contacts*
Measurement Rate Multiple readings every second
  Normal input state is settable under software
   
Interface  
Communications Cable RJ-45 jack to sensor using UTP Cat 5 wire
Communications Cable Max. length 1000 Ft (305m) with approved low capacitance shielded cable or UTP
Power Source Powered by the controller unit. No additional power needed
Dimensions 56 x 55 x 33.3 mm
Mounting DIN rail mounting
Screw mounting
  Up to 5 dry contact inputs per RJ-45
  – making up to 10 Dry Contact Inputs in sensorProbe2
  – making up to 20 Dry Contact Inputs in sensorProbe2+
Important Note Dry Contacts are not isolated, don’t connect any voltage source
Sensor count 5

Download Datasheet

Đang cập nhật...
Link DownLoad: DataSheet
Nội dung hỗ trợ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Trang chủ Danh mục 0 Giỏ hàng Đại lý Tài khoản