H108-9 AKCP Dry Contact Sensors
0đ
(Chưa VAT)Thông tin sản phẩm
Dry contact sensors are user definable and can be used to detect many different inputs
The Dry Contact sensor is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the sensorProbe.
- Product Code: DCS15
Số lượng
The Dry Contact sensor is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the sensorProbe. Dry contact sensors are user definable and can be used to detect many different inputs such as UPS status, security systems, air conditioning status.
Specifications
Measurement Range | Input: Alarm or Normal Output : Set or Reset |
Sensor Type | Input : Open / Closed contact switch Output : High (5V) / Low (GND) |
Contact voltage range | 5 volts pulled-up dry contacts* |
Input Measurement Rate | Multiple readings every second |
Normal input state is settable under software | |
Electrical Output | Can sink up to 20mA**, when set to Low |
Interface | |
Communications Cable | RJ-45 jack to sensor using UTP Cat 5 wire |
Communications Cable Max. length | 1000 Ft (305m) with approved low capacitance shielded cable or UTP |
Power Source | Powered by the base unit. No additional power needed |
Full autosense including disconnect alarm | |
Important Note | *Dry Contacts are not isolated, don’t connect any voltage source ** Dry contact output is not suitable for direcly driving a relay |
Sensor count | 1 |
Download Datasheet
Đang cập nhật...
Link DownLoad: DataSheet
Nội dung hỗ trợ