H109-3 AKCP Modbus Adapter

(Chưa VAT)

Thông tin sản phẩm

Convert the MOD/EXP port on the sensorProbeX+ and sensorProbe2+ from an RJ45 into 2 wire serial cable.
sensorProbeX+ comes equipped with an RS485 Modbus and Expansion port. When using this RJ45 port to connect Modbus appliances, the Modbus to SNMP Adapter makes it easier to connect a 2 wire serial bus cable to the RJ45 port, converting the RJ45 connector into a 3 pin terminal block connection.

  • Product Code: MOD-A
 
Số lượng

AKCP Modbus to SNMP Adapter

Specifications

Connector 3 pin phoenix connector :  A+, B+, GND
Electrical no galvanic isolation
Components Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
Operating Environment Temperature : Min. -35° C – Max.80° C
Humidity: Min. 20% – Max. 80% (Non-Condensing)
   
Interface  
Communications cable RJ-45 jack to sensor using UTP CAT5e/6 cable
Power source Powered by the controller unit. No additional power needed
Power Consumption Typical 0 mWatt, 0 mA
Maximum Cable Length  The Modbus Adaptor can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 1800 feet, or 550 meters using standard CAT5/6 LAN cable
Dimensions 56 x 55 x 33.3 mm
Mounting DIN rail mounting
Screw mounting

Download Datasheet

Đang cập nhật...
Link DownLoad: DataSheet
Nội dung hỗ trợ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Thêm vào giỏ
Trang chủ Danh mục 0 Giỏ hàng Đại lý Tài khoản