Tất cả sản phẩm

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần
  • Giá giảm dần ✓

LCP Load Cell Protector
The Novaris LCP provides protection for both 4-wire and 6-wire loadcells as well as the measuring instrument. The LCP is contained within an IP65 enclosure, or alternatively as a PCB only. Installation of the LCP is certified and does not affect weighbridge calibration.
Xuất xứ: Australia/ Malaysia

LCP Load Cell Protector
The Novaris LCP provides protection for both 4-wire and 6-wire loadcells as well as the measuring instrument. The LCP is contained within an IP65 enclosure, or alternatively as a PCB only. Installation of the LCP is certified and does not affect weighbridge calibration.
Xuất xứ: Australia/ Malaysia

Extended Voltage Surge Diverters
Novaris SDEV Extended Voltage Surge Diverters replace the SDD diverters for higher voltage installations. The SDEV diverters are housed in DIN compliant, failsafe metal enclosures and are fully compliant to AS/NZS1768-2007 and to AS/ NZS3000 wiring rules.
Xuất xứ: Australia/ Malaysia

xxx = Uc. (Insert required peak voltage) 14, 26, 38, 65, 130, 275.
Intrinsically Safe Protectors
The IS-SSP6A intrinsically safe series surge protectors complement the IS-SL range for applications of load currents up to 6A. Typical applications may include power supplies, digital outputs and other low voltage requirements up to 6A..
Xuất xứ: Australia/ Malaysia

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 500A
• Số cực: 3P
• Economy Class

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 630A
• Số cực: 3P
• Economy Class

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 600A
• Số cực: 3P
• Economy Class

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 125-160A
• Số cực: 4P
• Standard Class

Product Code: AP7553

DINsafe Surge Diverter
Use DIN compliant SDD Surge Diverters for distribution boards or for point of entry protection in small industrial and domestic applications. Installing two levels of surge protection, incoming and distribution boards, greatly increases the protection provided especially if there is a considerable distance between the two locations.
All Mode Protection
Protection is provided for all combinations of lines ensuring the maximum level of protection is achieved at all times.
Thermal Sensing
Sustained overvoltages can cause components to overheat and degrade. Thermal sensing warns of this condition without disconnecting the protection.
LED Status Active Display
An LED indicates that power is applied and the unit is healthy. An extinguished LED indicates that no power is present on the phase or that an internal overload has occurred.
Safe Metal Enclosure
Novaris power protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode.

Extended Voltage Surge Diverters
Novaris SDEV Extended Voltage Surge Diverters replace the SDD diverters for higher voltage installations. The SDEV diverters are housed in DIN compliant, failsafe metal enclosures and are fully compliant to AS/NZS1768-2007 and to AS/ NZS3000 wiring rules.
Xuất xứ: Australia/ Malaysia

ISP2 Series Surge Protectors
Novaris ISP2 series connected surge protectors are designed for low voltage AC and DC power circuits from 16 up to 63A. They provide excellent performance for both isolated and non-isolated supplies in a compact package offering all mode protection
Compact Design
Their compact design makes them an ideal choice for space restricted applications.
All Mode Protection
Protection is provided for all combinations of lines (L1-L2, L1-PE, L2-PE) ensuring the maximum level of protection is achieved at all times.
Safe Metal Enclosure
Novaris surge protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode.
Installation Independent Performance
Series surge protectors house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

SSP1 Series Surge Protectors
The Novaris SSP1 range of surge protectors are designed to provide economic protection to AC power circuits where the neutral conductor is earthed in the distribution system. They are in a two port series con×guration with load currents up to 63A and with differing levels of surge current rating. They are suitable for the typical 230/240V AC supplies whether TN-C-S or TT
configuration and provide all mode protection for where the neutral earth point might be some distance from the SPD.
Compact Design
Their compact design makes them an ideal choice for space restricted applications.
All Mode Protection
Protection is provided for all combinations of lines (L-N, L-PE, N-PE) ensuring the maximum level of protection is achieved at all times.
Safe Metal Enclosure
Novaris surge protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode.
Installation Independent Performance
Series surge protectors house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

SSP1 Series Surge Protectors
The Novaris SSP1 range of surge protectors are designed to provide economic protection to AC power circuits where the neutral conductor is earthed in the distribution system. They are in a two port series con×guration with load currents up to 63A and with differing levels of surge current rating. They are suitable for the typical 230/240V AC supplies whether TN-C-S or TT
configuration and provide all mode protection for where the neutral earth point might be some distance from the SPD.
Compact Design
Their compact design makes them an ideal choice for space restricted applications.
All Mode Protection
Protection is provided for all combinations of lines (L-N, L-PE, N-PE) ensuring the maximum level of protection is achieved at all times.
Safe Metal Enclosure
Novaris surge protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode.
Installation Independent Performance
Series surge protectors house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

SSP1 Series Surge Protectors
The Novaris SSP1 range of surge protectors are designed to provide economic protection to AC power circuits where the neutral conductor is earthed in the distribution system. They are in a two port series con×guration with load currents up to 63A and with differing levels of surge current rating. They are suitable for the typical 230/240V AC supplies whether TN-C-S or TT
configuration and provide all mode protection for where the neutral earth point might be some distance from the SPD.
Compact Design
Their compact design makes them an ideal choice for space restricted applications.
All Mode Protection
Protection is provided for all combinations of lines (L-N, L-PE, N-PE) ensuring the maximum level of protection is achieved at all times.
Safe Metal Enclosure
Novaris surge protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode.
Installation Independent Performance
Series surge protectors house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 175A
• Số cực: 4P
• Standard Class

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 200A
• Số cực: 4P
• Standard Class

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 225A
• Số cực: 4P
• Standard Class

• Sản xuất tại Nhật Bản
• Tiêu chuẩn IEC 60947-1,2
• Dòng định mức In 250A
• Số cực: 4P
• Standard Class

ELCB-CẦU DAO TỰ ĐỘNG CHỐNG DÒNG RÒ DẠNG KHỐI - DÒNG KINH TẾ C
EARTH LEAKAGE CIRCUIT BREAKER - C SERIES ELCB
Sản xuất tại Nhật Bản
Tiêu chuẩn IEC 60947-2
Dòng định mức tới 630A
Dòng rò định mức: 15,30,100,200,500mA
Bảo hành: 12 tháng

ELCB-CẦU DAO TỰ ĐỘNG CHỐNG DÒNG RÒ DẠNG KHỐI - DÒNG KINH TẾ C
EARTH LEAKAGE CIRCUIT BREAKER - C SERIES ELCB
Sản xuất tại Nhật Bản
Tiêu chuẩn IEC 60947-2
Dòng định mức tới 630A
Dòng rò định mức: 15,30,100,200,500mA
Bảo hành: 12 tháng

ELCB-CẦU DAO TỰ ĐỘNG CHỐNG DÒNG RÒ DẠNG KHỐI - DÒNG KINH TẾ C
EARTH LEAKAGE CIRCUIT BREAKER - C SERIES ELCB
Sản xuất tại Nhật Bản
Tiêu chuẩn IEC 60947-2
Dòng định mức tới 630A
Dòng rò định mức: 15,30,100,200,500mA
Bảo hành: 12 tháng

ELCB-CẦU DAO TỰ ĐỘNG CHỐNG DÒNG RÒ DẠNG KHỐI - DÒNG KINH TẾ C
EARTH LEAKAGE CIRCUIT BREAKER - C SERIES ELCB
Sản xuất tại Nhật Bản
Tiêu chuẩn IEC 60947-2
Dòng định mức tới 630A
Dòng rò định mức: 15,30,100,200,500mA
Bảo hành: 12 tháng