Sản phẩm

F207-436 Cầu dao chống dòng rò Mitsubishi MCB BVW-T 4P 100A 100MA - Hàng chính hãng

3,131,000đ

RCCB-CẦU DAO CHỐNG DÒNG RÒ DÒNG BVW-T
RCCB BVW-T SERIES
Sản xuất tại Ấn Độ
Dòng định mức tới 100A
Điện áp làm việc 240/415VAC

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

F207-419 Cầu dao chống dòng rò Mitsubishi MCB BVW-T 4P 100A 30MA - Hàng chính hãng

3,131,000đ

RCCB-CẦU DAO CHỐNG DÒNG RÒ DÒNG BVW-T
RCCB BVW-T SERIES
Sản xuất tại Ấn Độ
Dòng định mức tới 100A
Điện áp làm việc 240/415VAC

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

F207-453 Cầu dao chống dòng rò Mitsubishi BVW-T 4P 100A 300MA - Hàng chính hãng

3,131,000đ

RCCB-CẦU DAO CHỐNG DÒNG RÒ DÒNG BVW-T
RCCB BVW-T SERIES
Sản xuất tại Ấn Độ
Dòng định mức tới 100A
Điện áp làm việc 240/415VAC

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

Bộ ngắt mạch LV510336 Schneider MG CVS100F TM80D 3P 36kA

3,116,300đ

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

Bộ ngắt mạch LV510337 Schneider MG CVS100F TM100D 3P 36kA

3,116,300đ

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J329-9 Novaris SL2-36-EC90 Signal Surge Protector 36V, 500mA, 20kA 1 Pair with isolated earth c/w Base and alarm output

3,086,160đ

High Energy Signal Line Protection
The Novaris SL2 range provides 20kA high energy surge protection for balanced pair signaling circuits with line currents up to 500mA.
Multistage Protection
Following the primary GDT is a series coordinating impedance followed by a high-speed clamping diode circuit providing a safe voltage protection level for the connected equipment.
Pluggable Design
The protection circuitry is contained within a removable top module. This pluggable design allows for easy removal and replacement. Reliable goldplated connectors are used between top and base modules.
Earthing
The SL2 range utilizes a base which can be locked to the DIN rail by a screw that also provides an earth termination.
Failsafe Design
In the event of excessive surge current, a fuse will rupture, preventing a short circuit to earth.
Indication and Alarm
In the event of a failure a red indicating flag on the module will be activated. A normally closed alarm contact will open providing a means for remote condition monitoring.
Xuất xứ: Australia/ Malaysia

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J329-10 Novaris SL2-68-EC90 Signal Surge Protector 68V, 500mA, 20kA 1 Pair with isolated earth c/w Base and alarm output

3,086,160đ

High Energy Signal Line Protection
The Novaris SL2 range provides 20kA high energy surge protection for balanced pair signaling circuits with line currents up to 500mA.
Multistage Protection
Following the primary GDT is a series coordinating impedance followed by a high-speed clamping diode circuit providing a safe voltage protection level for the connected equipment.
Pluggable Design
The protection circuitry is contained within a removable top module. This pluggable design allows for easy removal and replacement. Reliable goldplated connectors are used between top and base modules.
Earthing
The SL2 range utilizes a base which can be locked to the DIN rail by a screw that also provides an earth termination.
Failsafe Design
In the event of excessive surge current, a fuse will rupture, preventing a short circuit to earth.
Indication and Alarm
In the event of a failure a red indicating flag on the module will be activated. A normally closed alarm contact will open providing a means for remote condition monitoring.
Xuất xứ: Australia/ Malaysia

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J329-11 Novaris SL2-485-EC90 Signal Surge Protector RS485, 500mA, 20kA 1 Pair with isolated earth c/w Base and alarm output

3,086,160đ

High Energy Signal Line Protection
The Novaris SL2 range provides 20kA high energy surge protection for balanced pair signaling circuits with line currents up to 500mA.
Multistage Protection
Following the primary GDT is a series coordinating impedance followed by a high-speed clamping diode circuit providing a safe voltage protection level for the connected equipment.
Pluggable Design
The protection circuitry is contained within a removable top module. This pluggable design allows for easy removal and replacement. Reliable goldplated connectors are used between top and base modules.
Earthing
The SL2 range utilizes a base which can be locked to the DIN rail by a screw that also provides an earth termination.
Failsafe Design
In the event of excessive surge current, a fuse will rupture, preventing a short circuit to earth.
Indication and Alarm
In the event of a failure a red indicating flag on the module will be activated. A normally closed alarm contact will open providing a means for remote condition monitoring.
Xuất xứ: Australia/ Malaysia

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J341-1 Novaris RJ45-1CAT6 1 Port RJ45 Ethernet Surge Protector, 10kA, CAT6 or POE for UTP cable

3,086,160đ

Local Area Network Protectors
Novaris network protection products are designed for the protection of equipment connected to twisted pair network cabling systems. They are compliant with CAT5, CAT6 and CAT6A cabling standards.
10kA Front End Protection & Low Impedance Secondary Protection
The RJ45-CAT6 protection products employ a 10kA Gas Discharge Tube per signal pair to dissipate the energy associated with large common mode surges.The silicon based secondary protection element used on each signal pair provides exceptional protection for your equipment whilst allowing network speeds up to Gigabit/1000BaseT.
PoE, PoE+, High Power PoE and beyond
The RJ45-CAT6 protection devices are compliant with PoE standards and can pass up to 1A of current per signal pair at up to 80VDC. This combination allows for Gigabit PoE systems with 4 pair power up to 160W.
Xuất xứ: Australia/ Malaysia

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J329-12 Novaris SL2-PSTN-EC90 Signal Surge Protector PSTN, 500mA, 20kA 1 Pair with isolated earth c/w Base and alarm output

3,086,160đ

High Energy Signal Line Protection
The Novaris SL2 range provides 20kA high energy surge protection for balanced pair signaling circuits with line currents up to 500mA.
Multistage Protection
Following the primary GDT is a series coordinating impedance followed by a high-speed clamping diode circuit providing a safe voltage protection level for the connected equipment.
Pluggable Design
The protection circuitry is contained within a removable top module. This pluggable design allows for easy removal and replacement. Reliable goldplated connectors are used between top and base modules.
Earthing
The SL2 range utilizes a base which can be locked to the DIN rail by a screw that also provides an earth termination.
Failsafe Design
In the event of excessive surge current, a fuse will rupture, preventing a short circuit to earth.
Indication and Alarm
In the event of a failure a red indicating flag on the module will be activated. A normally closed alarm contact will open providing a means for remote condition monitoring.
Xuất xứ: Australia/ Malaysia

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J364-12 Bộ chống sét lan truyền tín hiệu, 3 dây, M20 hãng Novaris, model IS-SLT3-xxx-M20

3,086,160đ

xxx = Uc. (Insert required peak voltage) 7V5, 18, 28, 36, 68, peak.
IS-SLT Intrinsically Safe
The intrinsically safe and Øameproof IS-SLT range provides surge protection for most twisted pair signal cables associated with intrinsically safe field devices.
Xuất xứ: Australia/ Malaysia

Hãng sản xuất :
Kích thước :

Thêm vào giỏ

J329-8 Novaris SL2-18-EC90 Signal Surge Protector 18V, 500mA, 20kA 1 Pair with isolated earth c/w Base and alarm output

3,086,160đ

High Energy Signal Line Protection
The Novaris SL2 range provides 20kA high energy surge protection for balanced pair signaling circuits with line currents up to 500mA.
Multistage Protection
Following the primary GDT is a series coordinating impedance followed by a high-speed clamping diode circuit providing a safe voltage protection level for the connected equipment.
Pluggable Design
The protection circuitry is contained within a removable top module. This pluggable design allows for easy removal and replacement. Reliable goldplated connectors are used between top and base modules.
Earthing
The SL2 range utilizes a base which can be locked to the DIN rail by a screw that also provides an earth termination.
Failsafe Design
In the event of excessive surge current, a fuse will rupture, preventing a short circuit to earth.
Indication and Alarm
In the event of a failure a red indicating flag on the module will be activated. A normally closed alarm contact will open providing a means for remote condition monitoring.
Xuất xứ: Australia/ Malaysia