Tất cả sản phẩm

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần ✓
  • Giá giảm dần

Mô tả:

Wireless Temperature and Humidity Monitoring
Ensure that your environmental conditions are within required parameters, log and graph data over time, and receive realtime alerts when user defined sensor thresholds are exceeded. Use as a data logger with data buffered and synchronized to gateway when in range. IP66 rated enclosure provides weatherproofing for use in outdoor environments. Mounting with DIN rail, wall hang or cable-tie / pipe clamp. Pair with any AKCP Wireless Tunnel™ gateway.

Mô tả:

Temperature and Humidity Monitoring
Monitor temperature and humidity in cabinets, refrigerators and rooms. With the integrated door contact sensor you are also able to keep track of your security condition, or ignore temperature fluctuations when the door is opened. IP66 rated enclosure provides weatherproofing for use in outdoor environments. Easy installation and pairing with AKCP Wireless Tunnel™ Gateway.

Mô tả:

Monitor fuel level and liquid storage tanks
Monitor tanks of depths up to 20 meters. Often tanks are located in outdoor or difficult to cable areas. The WT-TDPS is battery powered, or can be powered from a 5V DC or 12VDC source. Track fuel usage, graph the tank level, receive alerts when tank levels are critical. No more constraints on maximum cable lengths from the base unit. Easy installation and pairing with AKCP Wireless Tunnel™ Gateways.

Mô tả:

Integration to AKCP Switch Type Sensors
Battery powered Wireless Tunnel™ radio module. COnnect any AKCP Switch type sensor for monitoring over Wireless Tunnel™ network. These sensors should be ideally powered with batteries used for backup power only. Works with all Wireless Tunnel™ Gateways and the following switch type sensors:

• Rope Water Sensor
• Vibration Sensor
• Motion Detection

Mô tả:

Integration to Third Party Equipment
Turn any sensor with pulse counter output into a wireless sensors. A wide range of industrial sensors, flow meters, gauges and scientific equipment have pulse outputs. Wireless analog to digital sensors work with all Wireless Tunnel™ Gateways.

Mô tả:

Pipe Pressure Monitoring
Digital pressure gauge for monitoring all kinds of liquids and gasses. Battery Powered, Wireless Tunnel™ Technology. Remote monitoring via the internet, alerts and alarms when pressures are out of pre defined parameters. Upgrade existing analog gauges. Retain your existing gauges with our installation kit. Easy setup and pairing with AKCP Wireless Tunnel™ gateway.

Mô tả:

Pipe Pressure Differential Monitoring and Alerts
Digital pressure gauge for monitoring all kinds of liquids and gasses. Battery Powered, Wireless Tunnel™ Technology. Remote monitoring via the internet, alerts and alarms when pressures are out of pre defined parameters. Upgrade existing analog gauges. Retain your existing gauges with our installation kit. Easy setup and pairing with AKCP Wireless Tunnel™ Gateway.

Differential pressure sensors are useful for checking pressure drop across filters in your system. When pressure drop is significant, it can indicate dirty filters that require maintenance cleaning or replacement. Receive alerts via e-mail, SMS and other notification methods from AKCPro Server.

Mô tả:

Wireless Modbus Extension
Interface to third party equipment via Modbus RS485. Collect data from Modbus devices such as Generators, UPS and other industrial equipment. Exrtend Modbus RS485 long distance using our Wireless TUnnel™ technology. Monitor and alarm through any AKCP Wireless Tunnel™ Gateway.

Mô tả:

Wireless Monitoring and Control of I/O’s
Monitor and switch 10x I/O contacts over Wireless Tunnel™ network. No need for running cables over long distance back to the controller, monitor alarm panels, UPS and other devices with contact outputs. Control devices based on sensor inputs by switching from input to output. Works with all Wireless Tunnel™ Gateways.

Mô tả:

Wireless Air Pressure Differential
Wireless Tunnel™ radio module with differential air pressure. Monitor cabinets for pressure differential to ensure adequate airflow. Air Pressure Differential Sensors can also be utilized in hospitals or clean rooms where positive pressures are maintained inside rooms to keep them clean, or negative pressures to contain contaminants. Works with all Wireless Tunnel™ Gateway.

Mô tả:

Monitor 3 Phase or Single Phase Power
3x AC Voltage Inputs up to 487 VAC with 4x current transformer inputs, up to 50A max per phase. Monitor power with billable grade accuracy over Wireless Tunnel™ network with reports and alerts. Works with all Wireless Tunnel™ Gateways.

Mô tả:

Thermal Mapping of IT Cabinets
Wireless thermal mapping of your IT cabinets. With 3x Temperature sensors at the front and 3x at rear it monitors airflow intaske and exhaust temperatures, as well as providing the temperature differential between the front and rear of the cabinet (ΔT) Wireless Thermal maps work with all Wireless Tunnel™ Gateways.

Mô tả:

All In One Wireless Cabinet Sensor
The Wireless Cabinet Analysis Sensor (W-CAS) features a cabinet thermal map for detecting hot spots, differential pressure sensor for analysis of airflow and 2x dry contact inputs for door security sensors. Powered by USB, or 4x AA rechargeable batteries and using AKCP Wireless Wall Penetrating Technology data is collected and sent to one of our wireless sensor gateways. A wired version of the W-CAS is also available for use with the sensorProbeX+ base units.

Mô tả:

The test signal generator ASG10 in conjunction with AIM-M200 medical intelligent insulation monitor and AIL100 insulation fault locator are designed for insulation fault location in medical IT systems.

• Locating current injector for insulation fault location systems.
• IT connection monitoring with test LED.
• Alarm led when CAN active.
• Power on LED

Mô tả:

AID Series alarm and display devices are remote display and audible and visible alarm devices. AID duplicates fault, alarm and operating message of monitoring devices. When fault occurs, AID gives audible and visible signal to medical staff and technical staff. Additionally, response value of AIM-M series monitoring device can be set by AID remotely. AID Series alarm and display device have three types: AID10, AID120 and AID150, which shall be arranged in operating room or nursing station so that it can be permanently monitored by medical staff.

• Remote monitoring
• Mute button
• Test button
• Auxiliary power supply: DC24V
• RS485(MODBUS-RTU)

Mô tả:

AIL150-4/AIL150-8 insulation fault locator in conjunction with AIM-M200 insulation monitor and ASG150 signal generator are designed for insulation fault location in medical IT systems. AIL150-4 insulation fault locator can locate insulation faults of four  loops, AIL150-8 insulation fault locator can locate eight loops.

• Insulation fault location in AC IT systems
• AIL150-4: 4 measuring channels
• AIL150-8: 8 measuring channels
• LED indicators: On, Comm
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

AIL150-4/AIL150-8 insulation fault locator in conjunction with AIM-M200 insulation monitor and ASG150 signal generator are designed for insulation fault location in medical IT systems. AIL150-4 insulation fault locator can locate insulation faults of four loops, AIL150-8 insulation fault locator can locate eight loops.

• Insulation fault location in AC IT systems
• AIL150-8: 8 measuring channels
• LED indicators: On, Comm
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

• Insulation fault location in AC IT systems
• AIL150-4: 4 measuring channels
• AIL150-8: 8 measuring channels
• LED indicators: On, Comm
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

ASG150 test signal generator is designed with a 32-bit microprocessor chip and a high-precision signal generation circuit, It can generate a specific test signal.When IT system insulation fault occurs , it start to generate a test signal , and work with insulation fault locator to achieve insulation fault location.

• Generating Fault Location Signal
• Detection of L1 and L2 disconnection
• LED indicators: On, Comm, Test
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

The AKH-0.66P26 type current transformer is the protective current transformer supporting the AIM-M10 insulation monitor, of which the maximum measurable current is 60A and the transformation ratio is 2000:1. The current transformer is directly fixed inside cabinet by screwing, and the secondary side is leaded out by the terminal, which is convenient to install and use.

• maximum measurable current: 60A
• transformation change ratio: 2000:1

Mô tả:

BD-AI series Electricity Transducer can measure Voltage, Current, Power, Power factor, Frequency; 1.2 times of rated value overload; DC 0-5V/0-10V/0-20mA/4-20mA all can be choosed as analog output.

• AC current
• Overload: 1.2 times of rated value
• Analog Output DC 0-5V/0-10V/0-20mA/4-20mA

Mô tả:

AITR series isolation transformer is specially used in medical IT system.
The transformer core is made of silicon steel sheet, the loss is small. Double insulation treatment is adopted between windings, and a static screen is designed to reduce the electromagnetic interference between the two windings.
PT100 temperature sensor is installed in the winding, which can be used to monitor the winding temperature. The transformer is treated by vacuum impregnation, which increases the mechanical strength and has anti-corrosion effect. In addition, the product also uses low temperature rise and low noise design, so that it has good temperature rise performance and low noise
Isolating transformers for medical IT systems

• Double insulation treatment, Electrostatic shielding layer
• PT100 temperature sensor
• Rated power: 3.15…10KVA

Mô tả:

AID Series alarm and display devices are remote display and audible and visible alarm devices. AID duplicates fault, alarm and operating message of monitoring devices. When fault occurs, AID gives audible and visible signal to medical staff and technical staff. Additionally, response value of AIM-M series monitoring device can be set by AID remotely. AID Series alarm and display device have three types: AID10, AID120 and AID150, which shall be arranged in operating room or nursing station so that it can be permanently monitored by medical staff.

• Remote monitoring
• Mute button
• Test button
• Auxiliary power supply: DC24V
• RS485(MODBUS-RTU)

Mô tả:

HDR-60-24 DC power supply provides 24V DC power supply for Acrel AIM-M200 Medical intelligent insulation monitor, ASG150 test signal generator, AIL150 series insulation fault locator and AID200 centralized alarm and display, and a total power consumption of maximum 60VA.

• AC 100-220V input, DC 24V output
• Completely Isolated Linear Transformer
• Power-on indicator