Tất cả sản phẩm

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần ✓
  • Giá giảm dần

Mô tả:

AID Series alarm and display devices are remote display and audible and visible alarm devices. AID duplicates fault, alarm and operating message of monitoring devices. When fault occurs, AID gives audible and visible signal to medical staff and technical staff. Additionally, response value of AIM-M series monitoring device can be set by AID remotely. AID Series alarm and display device have three types: AID10, AID120 and AID150, which shall be arranged in operating room or nursing station so that it can be permanently monitored by medical staff.

• Remote monitoring
• Mute button
• Test button
• Auxiliary power supply: DC24V
• RS485(MODBUS-RTU)

Mô tả:

AID Series alarm and display devices are remote display and audible and visible alarm devices. AID duplicates fault, alarm and operating message of monitoring devices. When fault occurs, AID gives audible and visible signal to medical staff and technical staff. Additionally, response value of AIM-M series monitoring device can be set by AID remotely. AID Series alarm and display device have three types: AID10, AID120 and AID150, which shall be arranged in operating room or nursing station so that it can be permanently monitored by medical staff.

• Remote monitoring
• Mute button
• Test button
• Auxiliary power supply: DC24V
• RS485(MODBUS-RTU)

Mô tả:

AIL150-4/AIL150-8 insulation fault locator in conjunction with AIM-M200 insulation monitor and ASG150 signal generator are designed for insulation fault location in medical IT systems. AIL150-4 insulation fault locator can locate insulation faults of four  loops, AIL150-8 insulation fault locator can locate eight loops.

• Insulation fault location in AC IT systems
• AIL150-4: 4 measuring channels
• AIL150-8: 8 measuring channels
• LED indicators: On, Comm
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

AIL150-4/AIL150-8 insulation fault locator in conjunction with AIM-M200 insulation monitor and ASG150 signal generator are designed for insulation fault location in medical IT systems. AIL150-4 insulation fault locator can locate insulation faults of four loops, AIL150-8 insulation fault locator can locate eight loops.

• Insulation fault location in AC IT systems
• AIL150-8: 8 measuring channels
• LED indicators: On, Comm
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

• Insulation fault location in AC IT systems
• AIL150-4: 4 measuring channels
• AIL150-8: 8 measuring channels
• LED indicators: On, Comm
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

ASG150 test signal generator is designed with a 32-bit microprocessor chip and a high-precision signal generation circuit, It can generate a specific test signal.When IT system insulation fault occurs , it start to generate a test signal , and work with insulation fault locator to achieve insulation fault location.

• Generating Fault Location Signal
• Detection of L1 and L2 disconnection
• LED indicators: On, Comm, Test
• CAN bus
• Auxiliary power supply: DC24V

Mô tả:

The test signal generator ASG10 in conjunction with AIM-M200 medical intelligent insulation monitor and AIL100 insulation fault locator are designed for insulation fault location in medical IT systems.

• Locating current injector for insulation fault location systems.
• IT connection monitoring with test LED.
• Alarm led when CAN active.
• Power on LED

Mô tả:

The power supply module is designed to supply Acrel AID series devices with a supply voltage of DC 24V and a total power consumption of maximum 3VA. Module is rail mounted, installed on the same rail as insulation monitors.

• Auxiliary power supply to AID series
• AC 220V input, DC 24V output
• Completely Isolated Linear Transformer
• Power-on indicator

Mô tả:

HDR-60-24 DC power supply provides 24V DC power supply for Acrel AIM-M200 Medical intelligent insulation monitor, ASG150 test signal generator, AIL150 series insulation fault locator and AID200 centralized alarm and display, and a total power consumption of maximum 60VA.

• AC 100-220V input, DC 24V output
• Completely Isolated Linear Transformer
• Power-on indicator

Mô tả:

The AKH-0.66P26 type current transformer is the protective current transformer supporting the AIM-M10 insulation monitor, of which the maximum measurable current is 60A and the transformation ratio is 2000:1. The current transformer is directly fixed inside cabinet by screwing, and the secondary side is leaded out by the terminal, which is convenient to install and use.

• maximum measurable current: 60A
• transformation change ratio: 2000:1

Mô tả:

AITR series isolation transformer is specially used in medical IT system.
The transformer core is made of silicon steel sheet, the loss is small. Double insulation treatment is adopted between windings, and a static screen is designed to reduce the electromagnetic interference between the two windings.
PT100 temperature sensor is installed in the winding, which can be used to monitor the winding temperature. The transformer is treated by vacuum impregnation, which increases the mechanical strength and has anti-corrosion effect. In addition, the product also uses low temperature rise and low noise design, so that it has good temperature rise performance and low noise
Isolating transformers for medical IT systems

• Double insulation treatment, Electrostatic shielding layer
• PT100 temperature sensor
• Rated power: 3.15…10KVA

Mô tả:

BD-AI series Electricity Transducer can measure Voltage, Current, Power, Power factor, Frequency; 1.2 times of rated value overload; DC 0-5V/0-10V/0-20mA/4-20mA all can be choosed as analog output.

• AC current
• Overload: 1.2 times of rated value
• Analog Output DC 0-5V/0-10V/0-20mA/4-20mA

Mô tả:

• Combined current transformer is also called the three-phase current transformer
• As current signal acquisition device, it is generally matched with multi-loop current monitoring device (AMC16), PZ300, moulded case circuit breaker and other products.
• It can save installation space, reduce the cumbersome wiring, be convenient to use and effectively reduce the cost.

Mô tả:

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

• Measurement: AC, DC, pulse and other complex current
• Small package size
• Low power consumption
• Extended measuring range

Mô tả:

AHBC-LTA Closed-Loop hall sensor can measure AC, DC, pulse and other complex current signals. It has excellent accuracy, low temperature drift,wide frequency bandwidth, optimized response time

• Excellent accuracy
• Low temperature drift
• Wide frequency bandwidth
• Optimized response time

Mô tả:

Horizontal square hole type, they can pass through 1-6 bar bus and also pass through multiple cables. They are generally used with electrical measuring instruments, widely used in electrical sets. The appearance is nice and the wiring is convenient.

• Current transformer for measurement
• Suitable for cables or busbar
• Used with energy meters or relays

Mô tả:

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

• Split core current transformer
• Easy to install without power off
• Suitable for electricity renovation project

Mô tả:

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

• Split core current transformer
• Accuracy: class 0.5
• Suitable for electricity renovation projec

Mô tả:

• Current transformer for Protection
• 10P5 10P10 10P15

Mô tả:

• Capacity≤2.5VA
• Application：Measure and Protect

Mô tả:

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

• Current transformer for measurement
• Suitable for cables or busbar
• Used with energy meters or relays
• 30I, 40I Optinal Din Rail Mounted

Mô tả:

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

• Measurement: AC, DC, pulse and other complex current
• Small package size
• Low power consumption
• Extended measuring range

Mô tả:

• Primary Current: 5-2000A
• Secondary Current: 5A, 1A
• Accuracy: 0.2S 0.5S

Mô tả:

Current Transformer (CT) is used to transform the high AC current to small easily manageable values. They are connected with the panel meter or relay and they can help to measure the current or protect the equipment.

• Split core current transformer
• Accuracy: class 0.5
• Suitable for electricity renovation project