AKCP

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần
  • Giá giảm dần

Mô tả:

Monitor temperature differential between front and rear of your cabinet.

• Temperature only
• Dual Temperature and Humidity
• Check for cabinet hotspots

Mô tả:

Temperature sensor for exposed environments. This water resistant version of the AKCP temperature sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).

• Product Code: TMPW15
• Powered by the base unit

Mô tả:

Remote Monitoring with the AKCP Temperature Sensor. Ideal for Data Center monitoring, or anytime a temperature sensor is needed. Network enabled SNMP temperature sensor.
Designed to record accurate temperature sensor data it is ideal for giving advanced warning of temperature fluctuations that can potentially damage sensitive equipment
The AKCP Temperature Sensor is compatible with sensorProbe, sensorProbe+ and securityProbe platforms.

• Product Code: TMP01
• Use Code TMP00 for extendable length sensors.
• 2 variations available
• Powered by the base unit

Mô tả:

Water resistant temperature and humidity sensor
This water resistant version of the AKCP Single Port Temperature and Humidity Sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).

• Product Code: THSW15

Mô tả:

Integrate third party thermocouple with your securityProbe and sensorProbe+
The thermocouple adapters are designed to integrate either the AKCP thermocouple, or a third party thermocouple with the securityProbe and sensorProbe+ series of units.

• Product Code: TCXX

Mô tả:

The Air Velocity Sensor is designed for systems that generate heat, and a steady flow of air is necessary to dissipate this in order to maintain system reliability and safety.
This device is meant to monitor the status and the amount of the flowing air.

• Product Code: AVT00

Mô tả:

Wireless Water Detector
Wireless™ Tunnel radio module with AKCP Spot Water Sensor. Powered by 5VDC or 12VDC with battery backup and a full IP66 waterproof enclosure. The spot water sensor will alarm when water is detected. With the same technology as our wired spot water detector it can even detect the presence of de-ionised water. Works with all Wireless Tunnel™ Gateway.

Mô tả:

Wireless Water Distribution Control
Wireless, remote monitoring and control of motorized ball valves in your water distribution network. Check status and remotely actuate the valves. Receive alerts when valves open and close, or automate the valve based on other sensor inputs, such as pressure gauges or flow meters. works with all Wireless Tunnel™ Gateways.

Mô tả:

PT100 Type Ultra Cold Temperature Sensor
This sensor is suitable for monitoring a wider range of temperatures from -200°C to +150°C (-328°F to 302°F). Used for ultra-cold shipments, such as the mRNA based COVID-19 vaccines from Pfizer and Moderna. The Ultra Cold Temperature Sensor is based is an RTD type sensor (Resistance Temperature Detector) made from Platinum. As temperature changes so does the resistance of the metal. This is precisely measured to give a temperature reading. The accuracy of the sensor is ±0.2°C (±0.4°F).

Mô tả:

Temperature Sensor with built in calibration check
Wireless Tunnel™ NIST2 sensors feature 2x NIST traceable, calibrated temperature sensors in a single stainless steel tube. Working as a pair they check each others values once a second for accuracy. If we deteect the sensors are out of acceptable tolerances an alert is sent warning that the sensor requires re-calibration. NIST4 sensors come with 3x NIST traceable, calibrated temperature sensors in a single stainless steel tube. They work in pairs, with the averages of each pair averaged to give an overall reading. Improved accuracy and calibration checks with failover. Should any pair be out of calibration that value is ignored and an alert generated to warn that a pair is out of calibration.

Mô tả:

Wireless Temperature and Humidity Monitoring
Ensure that your environmental conditions are within required parameters, log and graph data over time, and receive realtime alerts when user defined sensor thresholds are exceeded. Use as a data logger with data buffered and synchronized to gateway when in range. IP66 rated enclosure provides weatherproofing for use in outdoor environments. Mounting with DIN rail, wall hang or cable-tie / pipe clamp. Pair with any AKCP Wireless Tunnel™ gateway.

Mô tả:

Temperature and Humidity Monitoring
Monitor temperature and humidity in cabinets, refrigerators and rooms. With the integrated door contact sensor you are also able to keep track of your security condition, or ignore temperature fluctuations when the door is opened. IP66 rated enclosure provides weatherproofing for use in outdoor environments. Easy installation and pairing with AKCP Wireless Tunnel™ Gateway.

Mô tả:

Monitor fuel level and liquid storage tanks
Monitor tanks of depths up to 20 meters. Often tanks are located in outdoor or difficult to cable areas. The WT-TDPS is battery powered, or can be powered from a 5V DC or 12VDC source. Track fuel usage, graph the tank level, receive alerts when tank levels are critical. No more constraints on maximum cable lengths from the base unit. Easy installation and pairing with AKCP Wireless Tunnel™ Gateways.

Mô tả:

Integration to AKCP Switch Type Sensors
Battery powered Wireless Tunnel™ radio module. COnnect any AKCP Switch type sensor for monitoring over Wireless Tunnel™ network. These sensors should be ideally powered with batteries used for backup power only. Works with all Wireless Tunnel™ Gateways and the following switch type sensors:

• Rope Water Sensor
• Vibration Sensor
• Motion Detection

Mô tả:

Integration to Third Party Equipment
Turn any sensor with pulse counter output into a wireless sensors. A wide range of industrial sensors, flow meters, gauges and scientific equipment have pulse outputs. Wireless analog to digital sensors work with all Wireless Tunnel™ Gateways.

Mô tả:

Pipe Pressure Monitoring
Digital pressure gauge for monitoring all kinds of liquids and gasses. Battery Powered, Wireless Tunnel™ Technology. Remote monitoring via the internet, alerts and alarms when pressures are out of pre defined parameters. Upgrade existing analog gauges. Retain your existing gauges with our installation kit. Easy setup and pairing with AKCP Wireless Tunnel™ gateway.

Mô tả:

Pipe Pressure Differential Monitoring and Alerts
Digital pressure gauge for monitoring all kinds of liquids and gasses. Battery Powered, Wireless Tunnel™ Technology. Remote monitoring via the internet, alerts and alarms when pressures are out of pre defined parameters. Upgrade existing analog gauges. Retain your existing gauges with our installation kit. Easy setup and pairing with AKCP Wireless Tunnel™ Gateway.

Differential pressure sensors are useful for checking pressure drop across filters in your system. When pressure drop is significant, it can indicate dirty filters that require maintenance cleaning or replacement. Receive alerts via e-mail, SMS and other notification methods from AKCPro Server.

Mô tả:

Wireless Modbus Extension
Interface to third party equipment via Modbus RS485. Collect data from Modbus devices such as Generators, UPS and other industrial equipment. Exrtend Modbus RS485 long distance using our Wireless TUnnel™ technology. Monitor and alarm through any AKCP Wireless Tunnel™ Gateway.

Mô tả:

Wireless Monitoring and Control of I/O’s
Monitor and switch 10x I/O contacts over Wireless Tunnel™ network. No need for running cables over long distance back to the controller, monitor alarm panels, UPS and other devices with contact outputs. Control devices based on sensor inputs by switching from input to output. Works with all Wireless Tunnel™ Gateways.

Mô tả:

Wireless Air Pressure Differential
Wireless Tunnel™ radio module with differential air pressure. Monitor cabinets for pressure differential to ensure adequate airflow. Air Pressure Differential Sensors can also be utilized in hospitals or clean rooms where positive pressures are maintained inside rooms to keep them clean, or negative pressures to contain contaminants. Works with all Wireless Tunnel™ Gateway.

Mô tả:

Monitor 3 Phase or Single Phase Power
3x AC Voltage Inputs up to 487 VAC with 4x current transformer inputs, up to 50A max per phase. Monitor power with billable grade accuracy over Wireless Tunnel™ network with reports and alerts. Works with all Wireless Tunnel™ Gateways.

Mô tả:

Thermal Mapping of IT Cabinets
Wireless thermal mapping of your IT cabinets. With 3x Temperature sensors at the front and 3x at rear it monitors airflow intaske and exhaust temperatures, as well as providing the temperature differential between the front and rear of the cabinet (ΔT) Wireless Thermal maps work with all Wireless Tunnel™ Gateways.

Mô tả:

All In One Wireless Cabinet Sensor
The Wireless Cabinet Analysis Sensor (W-CAS) features a cabinet thermal map for detecting hot spots, differential pressure sensor for analysis of airflow and 2x dry contact inputs for door security sensors. Powered by USB, or 4x AA rechargeable batteries and using AKCP Wireless Wall Penetrating Technology data is collected and sent to one of our wireless sensor gateways. A wired version of the W-CAS is also available for use with the sensorProbeX+ base units.

Mô tả:

Monitor Solar Panels and Batteries
Wireless Tunnel™ radio module with battery monitoring sensor can check battery health and solar panel output. Check solar panel efficiency. Monitoring current draw of batteries to ensure charging current is sufficient. Sensor monitors Voltage, Current and Temperature. Works with all Wireless Tunnel™ Gateway.