AKCP

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần
  • Giá giảm dần ✓

Mô tả:

PT100 Type Ultra Cold Temperature Sensor
This sensor is suitable for monitoring a wider range of temperatures from -200°C to +150°C (-328°F to 302°F). Used for ultra-cold shipments, such as the mRNA based COVID-19 vaccines from Pfizer and Moderna. The Ultra Cold Temperature Sensor is based is an RTD type sensor (Resistance Temperature Detector) made from Platinum. As temperature changes so does the resistance of the metal. This is precisely measured to give a temperature reading. The accuracy of the sensor is ±0.2°C (±0.4°F).

Mô tả:

Wireless Water Distribution Control
Wireless, remote monitoring and control of motorized ball valves in your water distribution network. Check status and remotely actuate the valves. Receive alerts when valves open and close, or automate the valve based on other sensor inputs, such as pressure gauges or flow meters. works with all Wireless Tunnel™ Gateways.

Mô tả:

Wireless Water Detector
Wireless™ Tunnel radio module with AKCP Spot Water Sensor. Powered by 5VDC or 12VDC with battery backup and a full IP66 waterproof enclosure. The spot water sensor will alarm when water is detected. With the same technology as our wired spot water detector it can even detect the presence of de-ionised water. Works with all Wireless Tunnel™ Gateway.

Mô tả:

The Air Velocity Sensor is designed for systems that generate heat, and a steady flow of air is necessary to dissipate this in order to maintain system reliability and safety.
This device is meant to monitor the status and the amount of the flowing air.

• Product Code: AVT00

Mô tả:

Integrate third party thermocouple with your securityProbe and sensorProbe+
The thermocouple adapters are designed to integrate either the AKCP thermocouple, or a third party thermocouple with the securityProbe and sensorProbe+ series of units.

• Product Code: TCXX

Mô tả:

Water resistant temperature and humidity sensor
This water resistant version of the AKCP Single Port Temperature and Humidity Sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).

• Product Code: THSW15

Mô tả:

Remote Monitoring with the AKCP Temperature Sensor. Ideal for Data Center monitoring, or anytime a temperature sensor is needed. Network enabled SNMP temperature sensor.
Designed to record accurate temperature sensor data it is ideal for giving advanced warning of temperature fluctuations that can potentially damage sensitive equipment
The AKCP Temperature Sensor is compatible with sensorProbe, sensorProbe+ and securityProbe platforms.

• Product Code: TMP01
• Use Code TMP00 for extendable length sensors.
• 2 variations available
• Powered by the base unit

Mô tả:

Temperature sensor for exposed environments. This water resistant version of the AKCP temperature sensor is designed for outdoor usage, or indoor area that are subject to water or moisture (eg. greenhouses).

• Product Code: TMPW15
• Powered by the base unit

Mô tả:

Monitor temperature differential between front and rear of your cabinet.

• Temperature only
• Dual Temperature and Humidity
• Check for cabinet hotspots

Mô tả:

Industrial strength temperature sensor
The AKCP thermocouple is perfect for use in heavy industries, such as petrochemical and metal processing.

• Product Code: TCXX
• Powered by the base unit
• J-K Thermocouple Adapters available

Mô tả:

PT100 Type Ultra Cold Temperature Sensor
This sensor is suitable for monitoring a wider range of temperatures from -200°C to +150°C (-328°F to 302°F). Used for ultra-cold shipments, such as the mRNA based COVID-19 vaccines from Pfizer and Moderna. The Ultra Cold Temperature Sensor is based is an RTD type sensor (Resistance Temperature Detector) made from Platinum. As temperature changes so does the resistance of the metal. This is precisely measured to give a temperature reading. The accuracy of the sensor is ±0.2°C (±0.4°F). This sensor is compatible with the sensorProbe+ platform only.

Mô tả:

A Passive Infrared Motion Detector for your security needs
When motion is detected, notifications can be sent to give instant feedback about the developing situation.

• Product Code: MD00

Mô tả:

Visual Alert of Sensor Status with Red, Orange, Green indicators.
Mount the sensor status light on top of your computer cabinet, at the end of an aisle, or in a control room. Lights can be programmed to be constant or flashing, allowing you to customize the alerts based on sensor type or status. A built in buzzer can also be activated to give an audible alert.
When mounted on top of your computer cabinets, you can have instant visual recognition of a cabinet in a warning or critical state, attracting the attention of technicians to investigate further.
Sensor status light is compatible with all SP+ and SEC+ base units.

• Product Code: SSL

Mô tả:

The 4-20mA converter is used to integrate the sensorProbe with a 4-20mA sensor
4-20mA technology is used to communicate analog signals over long distances where electrical interference is a problem.

• Product Code: VC00
• Powered by the base unit

Mô tả:

Add 5 dry contacts per RJ45 port on the SP2 and SP2+
These dry contact ports can be used to monitor any dry contact inputs through an RJ45 sensor port. Have up to 10 dry contacts on an SP2 and 20 on an SP2+. The sensor requires the 10 dry contact unlock license for the SP2. On the SP2+ 5 dry contact licenses are sold on a per-port basis. The dry contacts on the 5DCS are input only, if you require I/O on a sensor port, use the single dry contact cable (DCS15).

• Product Code: 5DCS
• Powered by the base unit

Mô tả:

The 8 Port Relay is specially designed multiport relay for advanced process control
The relay can provide automatic responses to sensor status changes.

• Product Code: 8PRB

Mô tả:

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet
The relay can provide automatic responses to sensor alerts, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered.

• Product Code: PRB00-ACO

Mô tả:

The AC voltage sensor is used to indicate the presence or absence of line voltage
The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor.

• Product Code: ACV00
• Powered by the base unit

Mô tả:

Monitoring the voltage, temperature and current load for batteries and DC power systems.
The Battery Monitoring Sensor monitors an individual cell or bank of batteries, as well as DC power systems like solar panel arrays. With this sensor, you can monitor:

• Temperature of the battery terminals
• Voltage output from batteries or panel array
• Current load on batteries or charging circuit
• Typical applications would be for monitoring a battery bank, solar panel array or generator starter batteries.
• Product Code : BATTMON

Mô tả:

Current Transformers are designed for easy installation with a simple, fast, safe and easy way to connect a monitoring system to your power supply
The AKCP transformers core can be easily opened and installed then connected without any supply interruption.

• Product Code: CTXXXX/5A
• Additional Types Available

Mô tả:

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet
The relay can provide automatic responses to sensor alerts, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered.

• Product Code: PRB00-DCO

Mô tả:

Dry contact sensors are user definable and can be used to detect many different inputs
The Dry Contact sensor is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the sensorProbe.

• Product Code: DCS15

Mô tả:

Power Monitoring and Switching

• Upgrade any power strip to a smart PDU
• Optional Latched Relays
• Optional thermal mapping

Advantages
Removing the controller from your power strip allows you to use a low cost basic power strip. This gives several advantages, in addition to the cost savings.

• A single IP address to monitor multiple cabinets.
• Hot swappable controller, no downtime to cabinets if servicing is needed
• More space for outlets on your power strip as the controller is moved out of the 0U space
• As future needs increase, just change the power strip no need for new controller and power meter.

Mô tả:

IO-Digital8 sensor with 8 ALARM/NORMAL indication
The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so it can be used to detect many different inputs.

• Product Code: IODC8
• Powered by the base unit