AKCP

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần
  • Giá giảm dần

Mô tả:

Visually inspect your enterprise assets and resources via your browser from anywhere in the world
The AKCP HD-DC has IR night vision capability and delivers between 15fps and 30fps depending on the resolution selected.

• Product Code: HD-DC
• Powered by the base unit

Mô tả:

Monitor fuel level, or other liquid levels in storage tanks. Ensure you never run low and are ready for the most critical moments
Tank Depth Sensor is compatible with all sensorProbe+ and securityProbe base units. Suitable for any tank up to 20 meters fluid depth. Programmable tank profile provides accurate measurement.
Product Code

• TDPS-2 (Tank Depth Pressure Sensor for 2 meter tank)*
• TDPS-5 (Tank Depth Pressure Sensor for 5 meter tank)*
• TDPS-10 (Tank Depth Pressure Sensor for 10 meter tank)*
• TDPS-15 (Tank Depth Pressure Sensor for 15 meter tank)*
• TDPS-20 (Tank Depth Pressure Sensor for 20 meter tank)*

Mô tả:

Connect analog sensors with 0-10 VDC output, and dry contact sensors that require constant 5 VDC power.
The Sensor Adapter makes it easy to connect third-party analog sensors that output a 0-10 DC Voltage scale.
A switch on the side of the sensor adapter allows you to switch to a dry contact I/O instead, which is capable of maintaining a 5VDC output to power the sensor at all times, while still monitoring the dry contact input.

• Product Code: SEN-A

Mô tả:

The Rope Fuel sensor detects the presence of liquid hydrocarbon fuels at any point along its length
This sensor is suited to locations that contain fuel storage tanks or fuel transfer stations and is especially ideal for remote locations that use diesel fuel generators.

• Product Code: FLKS
• Optional Lengths Available

Mô tả:

Turn off all notifications with a simple turn of a key switch
This product can be connected to the securityProbe Series as a dry contact and once set up is ready to work.

• Product Code: PS00
• Customized lengths available at an additional cost

Mô tả:

Convert the MOD/EXP port on the sensorProbeX+ and sensorProbe2+ from an RJ45 into 2 wire serial cable.
sensorProbeX+ comes equipped with an RS485 Modbus and Expansion port. When using this RJ45 port to connect Modbus appliances, the Modbus to SNMP Adapter makes it easier to connect a 2 wire serial bus cable to the RJ45 port, converting the RJ45 connector into a 3 pin terminal block connection.

• Product Code: MOD-A

Mô tả:

Display status and readings from any AKCP sensor, complete with built in temperature sensor
The AKCP Programmable Sensor Display plugs into any sensorProbe+ (SP2+, SPX+) base unit and can be programmed to display the data from any AKCP Intelligent or virtual sensor. Mount a single display on the end of an aisle for data center monitoring, or warehouse monitoring. Place on the door of every cabinet, or the wall of the room. LED indicators alert if a sensor is in critical condition, as well as the on-screen display of the critical or warning status.

Mô tả:

Drive larger relays with low current output from the sensorProbeX+ or sensorProbe2+
If you have an equipment with a relay that you would like to switch based on sensor input, this adapter will output 200mA – 5V DC based on a sensors status. Use this smaller relay as to drive the larger relay on your appliance.

• Product Code: MSCR

Mô tả:

The Isolated Digital Voltmeter can be used by OEMs and engineers to create their own custom data collection systems
The Digital Voltmeter has the full range of functionality including SNMP integration, email and trap generation upon settable limits and thresholds.

• Product Code: IDCV
• Powered by the base unit

Mô tả:

IO-Digital8 sensor with 8 ALARM/NORMAL indication
The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so it can be used to detect many different inputs.

• Product Code: IODC8
• Powered by the base unit

Mô tả:

Power Monitoring and Switching

• Upgrade any power strip to a smart PDU
• Optional Latched Relays
• Optional thermal mapping

Advantages
Removing the controller from your power strip allows you to use a low cost basic power strip. This gives several advantages, in addition to the cost savings.

• A single IP address to monitor multiple cabinets.
• Hot swappable controller, no downtime to cabinets if servicing is needed
• More space for outlets on your power strip as the controller is moved out of the 0U space
• As future needs increase, just change the power strip no need for new controller and power meter.

Mô tả:

Dry contact sensors are user definable and can be used to detect many different inputs
The Dry Contact sensor is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the sensorProbe.

• Product Code: DCS15

Mô tả:

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet
The relay can provide automatic responses to sensor alerts, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered.

• Product Code: PRB00-DCO

Mô tả:

Current Transformers are designed for easy installation with a simple, fast, safe and easy way to connect a monitoring system to your power supply
The AKCP transformers core can be easily opened and installed then connected without any supply interruption.

• Product Code: CTXXXX/5A
• Additional Types Available

Mô tả:

Monitoring the voltage, temperature and current load for batteries and DC power systems.
The Battery Monitoring Sensor monitors an individual cell or bank of batteries, as well as DC power systems like solar panel arrays. With this sensor, you can monitor:

• Temperature of the battery terminals
• Voltage output from batteries or panel array
• Current load on batteries or charging circuit
• Typical applications would be for monitoring a battery bank, solar panel array or generator starter batteries.
• Product Code : BATTMON

Mô tả:

The AC voltage sensor is used to indicate the presence or absence of line voltage
The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor.

• Product Code: ACV00
• Powered by the base unit

Mô tả:

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet
The relay can provide automatic responses to sensor alerts, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered.

• Product Code: PRB00-ACO

Mô tả:

The 8 Port Relay is specially designed multiport relay for advanced process control
The relay can provide automatic responses to sensor status changes.

• Product Code: 8PRB

Mô tả:

Add 5 dry contacts per RJ45 port on the SP2 and SP2+
These dry contact ports can be used to monitor any dry contact inputs through an RJ45 sensor port. Have up to 10 dry contacts on an SP2 and 20 on an SP2+. The sensor requires the 10 dry contact unlock license for the SP2. On the SP2+ 5 dry contact licenses are sold on a per-port basis. The dry contacts on the 5DCS are input only, if you require I/O on a sensor port, use the single dry contact cable (DCS15).

• Product Code: 5DCS
• Powered by the base unit

Mô tả:

The 4-20mA converter is used to integrate the sensorProbe with a 4-20mA sensor
4-20mA technology is used to communicate analog signals over long distances where electrical interference is a problem.

• Product Code: VC00
• Powered by the base unit

Mô tả:

Visual Alert of Sensor Status with Red, Orange, Green indicators.
Mount the sensor status light on top of your computer cabinet, at the end of an aisle, or in a control room. Lights can be programmed to be constant or flashing, allowing you to customize the alerts based on sensor type or status. A built in buzzer can also be activated to give an audible alert.
When mounted on top of your computer cabinets, you can have instant visual recognition of a cabinet in a warning or critical state, attracting the attention of technicians to investigate further.
Sensor status light is compatible with all SP+ and SEC+ base units.

• Product Code: SSL

Mô tả:

A Passive Infrared Motion Detector for your security needs
When motion is detected, notifications can be sent to give instant feedback about the developing situation.

• Product Code: MD00

Mô tả:

PT100 Type Ultra Cold Temperature Sensor
This sensor is suitable for monitoring a wider range of temperatures from -200°C to +150°C (-328°F to 302°F). Used for ultra-cold shipments, such as the mRNA based COVID-19 vaccines from Pfizer and Moderna. The Ultra Cold Temperature Sensor is based is an RTD type sensor (Resistance Temperature Detector) made from Platinum. As temperature changes so does the resistance of the metal. This is precisely measured to give a temperature reading. The accuracy of the sensor is ±0.2°C (±0.4°F). This sensor is compatible with the sensorProbe+ platform only.

Mô tả:

Industrial strength temperature sensor
The AKCP thermocouple is perfect for use in heavy industries, such as petrochemical and metal processing.

• Product Code: TCXX
• Powered by the base unit
• J-K Thermocouple Adapters available