Tất cả sản phẩm

• Sắp xếp sản phẩm +
  • Khuyến mãi
  • Giá tăng dần ✓
  • Giá giảm dần

Mô tả:

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet
The relay can provide automatic responses to sensor alerts, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered.

• Product Code: PRB00-ACO

Mô tả:

The AC voltage sensor is used to indicate the presence or absence of line voltage
The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor.

• Product Code: ACV00
• Powered by the base unit

Mô tả:

Monitoring the voltage, temperature and current load for batteries and DC power systems.
The Battery Monitoring Sensor monitors an individual cell or bank of batteries, as well as DC power systems like solar panel arrays. With this sensor, you can monitor:

• Temperature of the battery terminals
• Voltage output from batteries or panel array
• Current load on batteries or charging circuit
• Typical applications would be for monitoring a battery bank, solar panel array or generator starter batteries.
• Product Code : BATTMON

Mô tả:

Current Transformers are designed for easy installation with a simple, fast, safe and easy way to connect a monitoring system to your power supply
The AKCP transformers core can be easily opened and installed then connected without any supply interruption.

• Product Code: CTXXXX/5A
• Additional Types Available

Mô tả:

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet
The relay can provide automatic responses to sensor alerts, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered.

• Product Code: PRB00-DCO

Mô tả:

Dry contact sensors are user definable and can be used to detect many different inputs
The Dry Contact sensor is a simple connection to burglar alarms, fire alarms or any application that requires monitoring by the sensorProbe.

• Product Code: DCS15

Mô tả:

Power Monitoring and Switching

• Upgrade any power strip to a smart PDU
• Optional Latched Relays
• Optional thermal mapping

Advantages
Removing the controller from your power strip allows you to use a low cost basic power strip. This gives several advantages, in addition to the cost savings.

• A single IP address to monitor multiple cabinets.
• Hot swappable controller, no downtime to cabinets if servicing is needed
• More space for outlets on your power strip as the controller is moved out of the 0U space
• As future needs increase, just change the power strip no need for new controller and power meter.

Mô tả:

IO-Digital8 sensor with 8 ALARM/NORMAL indication
The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so it can be used to detect many different inputs.

• Product Code: IODC8
• Powered by the base unit

Mô tả:

The Isolated Digital Voltmeter can be used by OEMs and engineers to create their own custom data collection systems
The Digital Voltmeter has the full range of functionality including SNMP integration, email and trap generation upon settable limits and thresholds.

• Product Code: IDCV
• Powered by the base unit

Mô tả:

Drive larger relays with low current output from the sensorProbeX+ or sensorProbe2+
If you have an equipment with a relay that you would like to switch based on sensor input, this adapter will output 200mA – 5V DC based on a sensors status. Use this smaller relay as to drive the larger relay on your appliance.

• Product Code: MSCR

Mô tả:

Display status and readings from any AKCP sensor, complete with built in temperature sensor
The AKCP Programmable Sensor Display plugs into any sensorProbe+ (SP2+, SPX+) base unit and can be programmed to display the data from any AKCP Intelligent or virtual sensor. Mount a single display on the end of an aisle for data center monitoring, or warehouse monitoring. Place on the door of every cabinet, or the wall of the room. LED indicators alert if a sensor is in critical condition, as well as the on-screen display of the critical or warning status.

Mô tả:

Convert the MOD/EXP port on the sensorProbeX+ and sensorProbe2+ from an RJ45 into 2 wire serial cable.
sensorProbeX+ comes equipped with an RS485 Modbus and Expansion port. When using this RJ45 port to connect Modbus appliances, the Modbus to SNMP Adapter makes it easier to connect a 2 wire serial bus cable to the RJ45 port, converting the RJ45 connector into a 3 pin terminal block connection.

• Product Code: MOD-A

Mô tả:

Turn off all notifications with a simple turn of a key switch
This product can be connected to the securityProbe Series as a dry contact and once set up is ready to work.

• Product Code: PS00
• Customized lengths available at an additional cost

Mô tả:

The Rope Fuel sensor detects the presence of liquid hydrocarbon fuels at any point along its length
This sensor is suited to locations that contain fuel storage tanks or fuel transfer stations and is especially ideal for remote locations that use diesel fuel generators.

• Product Code: FLKS
• Optional Lengths Available

Mô tả:

Connect analog sensors with 0-10 VDC output, and dry contact sensors that require constant 5 VDC power.
The Sensor Adapter makes it easy to connect third-party analog sensors that output a 0-10 DC Voltage scale.
A switch on the side of the sensor adapter allows you to switch to a dry contact I/O instead, which is capable of maintaining a 5VDC output to power the sensor at all times, while still monitoring the dry contact input.

• Product Code: SEN-A

Mô tả:

Bộ chỉnh lưu -Bộ sạc Ắc quy công nghiệp Chloride CP-70R là bộ chỉnh lưu hàng đầu của Chloride Industrial Power. Sản phẩm được thiết kế để chịu được các điều kiện vận hành bằng điện và cơ khí khắc nghiệt nhất. Sản phẩm kết hợp thiết kế cẩn trọng với công nghệ điều khiển số mạnh mẽ để đem đến hiệu suất tốt nhất trong bất kỳ tình huống nào.
Sản phẩm sẵn có từ 25A đến 250A trong cấu hình đầu vào một pha, và từ 16 đến 2500A trong cấu hình đầu vào ba pha. Sản phầm sẵn có đầu ra 400 Vdc. Cấu hình này có thể được kết hợp với dải bộ chỉnh lưu Chloride CP-70i để thiết kế hệt hống UPS AC chuyển đổi kép định mức cao (lên đến 500 kVA. Chloride CP-70R được thiết kế để đáp ứng các điều kiện vận hành điện và cơ khí khắc nghiệt nhất trong môi trường công nghiệp. Những bộ phận lắp ráp có khả năng thay thế cho nhau cho phép hiệu chỉnh toàn bộ theo thông số kỹ thuật của khách hàng và yêu cầu về chứng từ của dự án. Sản phẩm này trước đây được biết đến với tên gọi Chloride Excel Apodys
Ứng dụng:

• Trạm truyền tải và phân phối cấp 1
• Sản xuất điện truyền thống
• Dầu khí (Upstream và Downstream)
• Hạ tầng giao thông
• Các quy trình liên tục

Mô tả:

Two Phase DIN Mount Surge Filters
The Novaris IFD2 range of surge ×lters is designed for protecting foating AC or DC power supplies. Applications include DC power supplies, balanced circuits for rail applications and single phase IT systems.
Multistage Protection
The IFD2 uses 3 stages of protection to provide a low let through voltage. The first stage comprises a delta con×guration of metal oxide varistors to provide clamping between both lines and between each line and earth. The second stage is a low pass filter providing instantaneous protection against high frequency impulses. The third stage is a line to line metal oxide varistor to provide an extra level of protection against primary and load side surges.
No Earth Leakage
The IFD2 configuration results in zero earth leakage under normal operating conditions. The earth reference for the product is isolated using a spark gap. This means even in the event of a short circuit failure within the device, no current will pass to earth.
Safe Metal Enclosure
Novaris power protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode. Installation Independent Performance
Series surge protectors such as the SSP and IFD range house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

Mô tả:

Two Phase DIN Mount Surge Filters
The Novaris IFD2 range of surge ×lters is designed for protecting foating AC or DC power supplies. Applications include DC power supplies, balanced circuits for rail applications and single phase IT systems.
Multistage Protection
The IFD2 uses 3 stages of protection to provide a low let through voltage. The first stage comprises a delta con×guration of metal oxide varistors to provide clamping between both lines and between each line and earth. The second stage is a low pass filter providing instantaneous protection against high frequency impulses. The third stage is a line to line metal oxide varistor to provide an extra level of protection against primary and load side surges.
No Earth Leakage
The IFD2 configuration results in zero earth leakage under normal operating conditions. The earth reference for the product is isolated using a spark gap. This means even in the event of a short circuit failure within the device, no current will pass to earth.
Safe Metal Enclosure
Novaris power protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode. Installation Independent Performance
Series surge protectors such as the SSP and IFD range house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

Mô tả:

Two Phase DIN Mount Surge Filters
The Novaris IFD2 range of surge ×lters is designed for protecting foating AC or DC power supplies. Applications include DC power supplies, balanced circuits for rail applications and single phase IT systems.
Multistage Protection
The IFD2 uses 3 stages of protection to provide a low let through voltage. The first stage comprises a delta con×guration of metal oxide varistors to provide clamping between both lines and between each line and earth. The second stage is a low pass filter providing instantaneous protection against high frequency impulses. The third stage is a line to line metal oxide varistor to provide an extra level of protection against primary and load side surges.
No Earth Leakage
The IFD2 configuration results in zero earth leakage under normal operating conditions. The earth reference for the product is isolated using a spark gap. This means even in the event of a short circuit failure within the device, no current will pass to earth.
Safe Metal Enclosure
Novaris power protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode. Installation Independent Performance
Series surge protectors such as the SSP and IFD range house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

Mô tả:

Two Phase DIN Mount Surge Filters
The Novaris IFD2 range of surge filters is designed for protecting foating AC or DC power supplies. Applications include DC power supplies, balanced circuits for rail applications and single phase IT systems.
Multistage Protection
The IFD2 uses 3 stages of protection to provide a low let through voltage. The first stage comprises a delta con×guration of metal oxide varistors to provide clamping between both lines and between each line and earth. The second stage is a low pass filter providing instantaneous protection against high frequency impulses. The third stage is a line to line metal oxide varistor to provide an extra level of protection against primary and load side surges.
No Earth Leakage
The IFD2 configuration results in zero earth leakage under normal operating conditions. The earth reference for the product is isolated using a spark gap. This means even in the event of a short circuit failure within the device, no current will pass to earth.
Safe Metal Enclosure
Novaris power protection products are housed in safe, all metal enclosures. In the event of a prolonged overvoltage they will not catch fire or explode. Installation Independent Performance
Series surge protectors such as the SSP and IFD range house the shunt (parallel) connection of the protection components internally within the device. This reduces the connection impedance to a minimum to guarantee optimal performance in all installations.
Xuất xứ: Australia/ Malaysia

Mô tả:

Hệ thông BRAVO ECI là một giải pháp chuyển đổi năng lượng mô đun nhỏ gọn cung cấp nguồn AC sóng hình sine chuẩn. Cùng với hệ thống nguồn DC, sản phẩm cung cấp giải pháp dự phòng AC xuất sắc. Sản phẩm sử dụng công nghệ chuyển đổi mới nhất, cung cấp hiệu năng chuyển đổi lên đến 96% từ AC sang AC và trên 93,5% từ DC sang AC. Công nghệ ECI xóa bỏ tất cả các điểm sự cố và có thể thay thế nóng (nghĩa là có thể bảo trì dễ dàng với chi phí thấp).

Mô tả:

The Liebert® RDU-A G2 is an infrastructure management solution from Vertiv that allows data center administrators to manage environmental conditions i.e. temperature and humidity, leak, smoke, vibrations and digital inputs and outputs.
Best Suited For:

• Banking, Financial and Insurance 
• Education 
• Government 
• Healthcare 
• Retail and Wholesale 
• Manufacturing

Mô tả:

Compatible with all Access Control Readers
The main advantage of using proximity cards is that they only need to be held near the reader in order to be read.

• Product Code: ACT03
• Ships as a pack of 25

Mô tả:

Compatible with all Access Control Readers
The USB Desktop Card Reader is a compact and cost-effective contactless reader / writer which supports EM Frequency cards.

• Product Code: ACT05
• Powered via USB